Home › Grading & Leveling in Beaverton, OR
Grading and leveling in Beaverton, OR. Beaverton Excavation Co. shapes grade for drainage, driveways, pads, and yards, holding elevation to a tenth of a foot. Free estimates, licensed and insured.
Grading and leveling in Beaverton turns uneven ground into a surface that drains, builds, and drives the way it should. Beaverton Excavation Co. shapes pads, yards, driveways, and commercial sites to planned elevations, holding tight grade where the job requires it and building positive fall where water needs a path. Good grading should disappear into the finished project; bad grading shows up every winter.
Here, grade is not just about making dirt look smooth. Beaverton has low clay pockets, former wet ground, and real hillside neighborhoods where runoff can move fast from one property to the next. A small change in slope can decide whether water moves toward Fanno Creek, Beaverton Creek, or a legal outfall — or back toward your crawl space. We shape the site so winter rain has somewhere intentional to go.
Whether the job is a small yard level or a full plan-based cut, Beaverton Excavation Co. shapes the ground for grade, drainage, and use. Our grading work includes:
In Beaverton, flat-looking ground can still be wrong if the fall sends water toward a structure. We have regraded settled neighborhood lots and new rural pads, and the constant is drainage. The work sets positive slope away from buildings, uses swales to carry runoff to a legal outfall, and compacts the grade as it is built so winter does not create new low spots. When clay will not drain by shape alone, we pair the grading with a drainage system.
Durable grading takes more than one pass with a blade. Loose fill settles, and soil placed without compaction can slump after the first wet season. We build grade in compacted lifts so a pad or driveway base remains at the elevation we set instead of needing another repair call.
Beaverton is not the dead-flat grading problem people expect from the valley floor. The city ranges from low, wet ground near Beaverton Creek and Fanno Creek to real hillside lots on Cooper Mountain, Sexton Mountain, Highland, and the West Slope. That relief changes everything: water comes off high ground fast, pads need balanced cut-and-fill, and a driveway or yard that looks close by eye can still send runoff straight at the house. We build the fall deliberately, not by guesswork.
The lower parts of Beaverton also carry the area's old beaver-dam and wetland story. Ground that has been saturated, tilled, filled, or reworked over time does not grade uniformly. We shoot elevations across the whole site, account for low corners and old contours, and cut grade that carries water toward a real outfall — a swale, a ditch, or an approved drainage path — rather than just smoothing the surface and hoping.
Residential grading in Beaverton most often falls between $1,200 to $5,500. Cost changes with soil volume, finish tolerance, equipment access, and whether the site needs imported material. Excavator or skid steer work with an operator is commonly about $110 to $190 per hour, while finish grading may be priced by area. If fill or rock has to be brought in, plan on roughly $35 to $60 per ton delivered and placed. The ranges below reflect typical Washington County projects.
| Grading scope | Typical size | Typical Beaverton cost |
|---|---|---|
| Yard leveling (small) | up to 1/4 acre | $1,200 – $3,000 |
| Driveway / pad grading | per project | $1,500 – $4,500 |
| Rough + finish grade (lot) | 1/4 – 1/2 acre | $2,500 – $7,500 |
| Drainage regrade w/ swales | per project | $2,000 – $6,000 |
| Imported fill / rock | add-on | +$35 – $60 / ton |
Ranges are typical for the Beaverton / Washington County area and include grading and cleanup. Volume of dirt, finish tolerance, wet ground, and imported material move the number. We give a firm, itemized quote after a free site visit — no obligation.
When a Beaverton grading job moves enough soil, the jurisdiction may require a City of Beaverton or Washington County grading permit. Once ground is disturbed, Clean Water Services erosion-control rules also come into play. Beaverton Excavation Co. handles the permit path and installs controls that keep runoff from carrying soil to the storm drain, keeping the inspection side as simple as the dirt work allows.
We visit the site, shoot elevations, study drainage and access, and turn the grading scope into a written itemized quote.
Grade stakes or lasers are set from the plan, and any permit or erosion-control requirement is handled before the work starts.
The crew moves material, forms the drainage pattern and finished grade, and compacts during placement so the new shape holds.
Final elevations are checked against the plan, and the site is left clean, draining correctly, and ready for the next trade.
Most residential grading projects in Beaverton fall between $1,200 and $5,500. Small yard leveling can start near $1,200, while full rough-and-finish grading, drainage shaping, or hillside cut-and-fill costs more. Hourly equipment-and-operator work is commonly $110 to $190, and finish grading may be priced by area. We confirm the number after checking slope, access, and soil.
Rough grading is the heavy shaping pass: moving soil, building contours, and getting the site near planned elevations. Finish grading is the tighter final pass for pads, driveways, lawns, and drainage surfaces, often held within a tenth of a foot. Beaverton projects commonly need both, especially where hillside runoff or low clay pockets affect drainage.
It can when the problem is surface water or bad slope. We can regrade fall away from the house, cut swales, and direct runoff to a legal drainage path. If the issue is groundwater or clay that stays saturated, grading may need to be paired with a French drain, catch basin, or downspout tie-in so the new shape actually has somewhere to send the water.
If the work moves meaningful soil, usually yes. The City of Beaverton or Washington County may require a grading permit, and Clean Water Services erosion-control rules apply once ground is disturbed. We check the jurisdiction, pull the permits the job needs, and install erosion control before runoff can leave the site.
A simple residential regrade or yard leveling project often takes one to two days after layout and permits. Larger pads, hillside balancing, drainage swales, imported fill, or wet-season clay can extend the job several days. We schedule around compaction conditions because rushing saturated soil usually creates a grade that fails later.
Send over the basics of the job and we will visit the property, walk the ground with you, and price the scope in writing — no pressure and no obligation. Call, text, or use the form; we reply the same business day.
Call or text to reach our team directly. During business hours we pick up when we can, and every message gets a return call.
(971) 397-9361Hours: Mon–Sat, 7am–6pm